
In modern hydraulic, pneumatic, automotive, and industrial equipment, a sealing system is rarely just a single rubber ring. When operating conditions involve high pressure, reciprocating movement, changing temperatures, vibration, or demanding leakage-control requirements, engineers may need a more sophisticated solution. A combined sealing system brings two or more sealing elements or functional materials together to achieve performance that may be difficult to obtain from a conventional single-component seal.
Combined seals are widely used in hydraulic cylinders, piston and rod assemblies, pumps, valves, gearboxes, and other equipment where reliability and service life directly affect operating costs. However, the term “combi oil seal” can describe several different designs. It may refer to an elastomer-energized PTFE seal, a multi-lip sealing element, or multiple seals arranged in series. Understanding the construction and operating principle is essential before selecting a design.
Engineering takeaway: A combined seal is not automatically better than a single seal. Its effectiveness depends on how the sealing elements share pressure, control the lubricant film, accommodate movement, and manage heat and wear under the actual operating conditions.
What Is a Combined Sealing System?
A combi oil seal is a sealing arrangement that integrates two or more functional components into one assembly or uses multiple sealing elements to perform complementary tasks. Instead of relying on one material or one sealing lip to handle every operating condition, the design distributes different responsibilities among the components.
For example, a common hydraulic combined seal consists of an elastomeric energizing element and a thermoplastic sealing jacket. The elastomer provides resilience and maintains contact pressure, while the jacket—often manufactured from polytetrafluoroethylene (PTFE) or a modified polymer—provides a low-friction sliding surface and wear resistance.
Other combined sealing arrangements may use a primary pressure seal, a secondary sealing element, an anti-extrusion ring, and a wiper. Each component has a defined role in controlling fluid leakage, protecting the main seal, or extending operating life.
Common combined seal configurations
Elastomer + PTFE
An elastomer energizer maintains sealing contact while a PTFE jacket provides low friction and sliding wear resistance. Common in hydraulic piston and rod applications.
Primary + Secondary Seals
Two sealing elements work in sequence to improve leakage control or provide a secondary containment function. The inter-seal space must be considered during design.
Seal + Backup Ring
An elastomeric seal works with a harder anti-extrusion ring to reduce the risk of material being forced into the clearance gap under pressure.
Multi-Lip Seal
Multiple lips perform different functions, such as primary fluid retention, secondary leakage control, and exclusion of external contaminants.
What Is the Operating Principle of Combined Sealing?
The operating principle is based on the coordinated action of different sealing components. Each component contributes a specific mechanical or tribological function, and the complete assembly controls the fluid path between two machine parts.
Elastic Preload Creates Initial Sealing Contact
In an elastomer-energized combined seal, the rubber element is compressed during installation. This deformation generates an initial contact force between the sealing jacket and the mating surface, even before the system is pressurized.
When hydraulic pressure enters the sealing system, the pressure acts on the seal profile and increases the contact force at the sealing interface. This pressure-assisted behavior helps the seal adapt to changing operating loads, provided that the groove geometry, material properties, and extrusion clearance are correctly designed.
The energizer must retain sufficient elasticity over the expected temperature range and operating life. If it takes excessive compression set, becomes chemically degraded, or loses resilience, the sealing jacket may no longer receive adequate support.
The Sealing Element Controls the Leakage Path
The main sealing component forms a controlled contact zone against the shaft, rod, piston bore, or other mating surface. In dynamic applications, the interface is not necessarily completely dry. A very thin lubricating film may remain between the sealing lip and the moving surface.
This film is important because it reduces friction and prevents excessive heat generation. The seal must balance two competing requirements: restricting unwanted fluid leakage while maintaining sufficient lubrication to limit wear.
In a well-designed combined seal, the geometry and material properties help regulate this interface. The result depends on surface finish, contact pressure, speed, fluid viscosity, temperature, and the direction of movement.
Different Materials Perform Different Functions
One of the main advantages of a material-based combined seal is that it does not require a single material to provide every desired property.
| Component | Typical Material | Main Function |
|---|---|---|
| Energizing element | NBR, FKM, EPDM, HNBR | Elastic preload and pressure response |
| Sliding jacket | PTFE or modified PTFE | Low friction and wear resistance |
| Anti-extrusion ring | PTFE, POM, PA or other engineered polymers | Support against extrusion into clearance gaps |
| Metal support or housing | Application-specific metals | Structural support and component retention |
Important: These are examples, not universal material recommendations. The correct elastomer and polymer combination must be checked against the actual fluid, temperature, pressure, speed, and cleaning or environmental exposure.
Multiple Sealing Elements Divide the Workload
In a multi-element arrangement, the primary seal generally handles the main pressure difference. A secondary seal may provide additional leakage control, while a wiper prevents dust, water, and other contaminants from entering the system.
Some hydraulic rod sealing systems use a buffer seal ahead of the main rod seal. The buffer element reduces the pressure or shock loading experienced by the primary seal, depending on the design. The arrangement must also allow any pressure or fluid trapped between the elements to escape safely.
Design warning: Two seals installed in separate grooves can trap fluid between them. Thermal expansion or leakage past the first seal may cause inter-seal pressure to rise, potentially overloading the second seal. Provide a suitable vent, drain, pressure-relief path, or engineered inter-seal arrangement where required.
Combined Seals vs. Conventional Single Seals
A combined sealing solution is often selected when a conventional O-ring or U-cup cannot meet all performance requirements. However, a simpler seal may still be the more economical and reliable option for a straightforward application.
| Evaluation Factor | Single Seal | Combined Seal |
|---|---|---|
| Construction | Usually simpler | Multiple functional components or sealing stages |
| Friction control | Depends on the selected material and profile | Can combine elastic loading with a low-friction surface |
| Pressure management | Limited by the individual profile and support conditions | Can incorporate backup or buffer functions |
| Installation | Often easier | May require more precise orientation and groove control |
| Cost | Often lower initial component cost | May cost more but can reduce maintenance in demanding duties |
The correct comparison should include total operating cost rather than purchase price alone. Leakage, downtime, replacement labor, surface damage, and contamination can make an apparently inexpensive seal costly over its service life.
Main Types of Combined Seals and Their Applications
Rubber-Energized PTFE Seals
Rubber-energized PTFE seals combine the elastic recovery of an elastomer with the sliding characteristics of a PTFE-based sealing element. The elastomer applies radial or axial loading, depending on the design, while the PTFE component provides the working contact surface.
These seals are frequently considered for hydraulic pistons, rods, valves, and applications requiring controlled friction. Their suitability depends on pressure, velocity, clearance, temperature, and the PTFE compound selected.
Composite Piston Seals
Composite piston seals are designed to seal between the piston and cylinder bore. Many designs combine an elastomeric energizer with a polymer sealing ring. Depending on the profile, they can provide single-acting or double-acting sealing performance.
For double-acting cylinders, pressure can occur on either side of the piston. The seal profile and groove must therefore be designed for the expected pressure directions. A design intended for one-way pressure should not be assumed suitable for bidirectional operation.
Combined Rod Sealing Systems
Rod sealing systems often contain more than one element because they must retain hydraulic fluid during extension and retraction while protecting the cylinder interior from external contamination.
A typical arrangement may include a buffer seal, a primary rod seal, and a wiper. The buffer seal helps manage pressure peaks, the primary seal controls fluid leakage, and the wiper removes contaminants from the rod surface as it retracts.
Seal and Anti-Extrusion Ring Assemblies
At high pressure, elastomeric materials may deform into the clearance between moving components. This phenomenon is known as extrusion. A backup ring provides mechanical support and reduces the available extrusion space.
Backup rings are particularly relevant where pressure is high, clearances are relatively large, or temperature and material softening increase the risk of extrusion. The ring material, thickness, split design, and groove dimensions must be selected together with the primary seal.
Multi-Lip Sealing Elements
A multi-lip seal integrates more than one lip into a single component. The primary lip may retain lubricant, while a secondary lip limits leakage or helps exclude contaminants. Some designs also include a dedicated dust lip.
Multiple lips do not automatically eliminate leakage. Their performance depends on lip geometry, contact pressure, lubrication, surface condition, and the pressure relationship between the lips.
How to Select the Right Combined Seal
For OEM engineers, maintenance teams, and industrial distributors, seal selection should begin with the application data rather than the seal’s external appearance. Two seals with similar dimensions can have very different operating limits because of differences in profile, compound, hardness, and internal construction.
Identify the Movement Type
- Reciprocating: The sealing element moves linearly along a rod or within a bore. Friction, lubrication, stroke length, and reversal behavior are important.
- Rotary: The sealing surface moves around an axis. Surface speed, heat generation, shaft finish, and concentricity require attention.
- Static: The seal is compressed between stationary components. Compression, chemical compatibility, and joint movement are key considerations.
- Oscillating: The movement repeatedly changes direction over a limited angle. Stick-slip, lubrication, and local wear may become important.
Confirm Pressure and Pressure Direction
Record the normal operating pressure, maximum pressure, pressure spikes, and whether pressure acts from one side or both sides. A combined seal designed for unidirectional pressure may not work correctly in a bidirectional system.
For hydraulic cylinders, also identify whether the application experiences rapid pressure reversals, impact loads, or pressure trapped between adjacent sealing elements.
Check Temperature and Fluid Compatibility
Temperature affects elastomer hardness, elasticity, compression set, polymer strength, and lubricant viscosity. Chemical compatibility must be evaluated using the actual fluid formulation, including additives and any cleaning chemicals that may contact the seal.
| Material | Typical Strength | Selection Consideration |
|---|---|---|
| NBR | Common choice for many mineral-oil hydraulic fluids | Check temperature, fluid additives, and ozone exposure |
| HNBR | Improved heat and mechanical performance compared with standard NBR grades | Verify compatibility with the specific fluid and operating temperature |
| FKM | Useful for many higher-temperature and chemically demanding duties | Not universally compatible; low-temperature behavior and fluid chemistry matter |
| EPDM | Often used with water, steam, and selected polar fluids | Generally unsuitable for many petroleum-based oils |
| PTFE | Low friction and broad chemical resistance | Consider creep, deformation, compound, and energizer design |
Material names alone are not sufficient for approval. Different formulations of the same polymer family can have different mechanical and chemical properties. Request the supplier’s compound data and confirm suitability for the actual duty.
Evaluate the Groove and Mating Surface
The seal groove is part of the sealing system. Incorrect groove width, depth, corner radius, or clearance can cause excessive compression, insufficient contact pressure, twisting, or extrusion.
For dynamic seals, inspect the mating surface for scratches, corrosion, waviness, excessive roughness, and lead patterns from machining. A surface that is too rough can accelerate wear, while an unsuitable finish may fail to retain the lubricating film needed for reliable operation.
Do not specify surface roughness using a single generic value for every seal. Follow the selected seal manufacturer’s profile-specific recommendations for surface finish, hardness, and lead-free machining requirements.
Consider Speed, Friction, and Heat
As reciprocating or rotary speed increases, frictional heat can become a limiting factor. Higher contact pressure may improve leakage control but can also increase friction and wear. A low-friction polymer jacket may help, but its suitability still depends on the load, lubrication, and mating surface.
For continuous-duty or high-cycle applications, ask the manufacturer to review the complete operating envelope rather than approving a seal based only on maximum pressure or temperature.
Common Combined Seal Failures and Practical Solutions
When a combined seal fails, replacing the component without identifying the root cause can lead to repeated leakage and unnecessary maintenance. The condition of the failed seal often provides useful evidence about the underlying problem.
| Observed Problem | Possible Cause | Recommended Action |
|---|---|---|
| External fluid leakage | Worn sealing lip, damaged surface, incorrect installation, or incompatible material | Inspect the seal contact area, rod or bore, fluid, and installation direction |
| Seal extrusion or nibbling | Excessive clearance, pressure spikes, insufficient backup support, or unsuitable material | Measure clearance and review backup-ring design and pressure conditions |
| Cracking or hardening | Excessive temperature, chemical attack, or aging | Verify temperature history and fluid compatibility; reconsider the compound |
| Rapid lip wear | Poor surface finish, contamination, inadequate lubrication, or excessive friction | Inspect surface condition, filtration, lubrication, speed, and contact loading |
| Seal twisting or rolling | Incorrect groove dimensions, excessive friction, poor guidance, or installation damage | Check groove geometry, alignment, bearing support, and assembly procedure |
| High operating temperature | Excessive contact pressure, high speed, poor lubrication, or incorrect seal profile | Review friction, operating cycle, lubrication, and seal selection |
| Unexpected secondary-seal failure | Pressure trapped between seals or incorrect pressure staging | Review inter-seal pressure and provide an engineered vent or relief route |
A Practical Troubleshooting Sequence
- Record the failure conditions. Note pressure, temperature, speed, cycle frequency, fluid type, and time to failure.
- Preserve the failed seal. Photograph its installed orientation and inspect the sealing lips, energizer, and backup components before disposal.
- Inspect the mating hardware. Measure the rod or bore, groove dimensions, clearance, alignment, and surface condition.
- Check the system fluid. Look for contamination, incorrect viscosity, fluid degradation, and compatibility issues.
- Review the complete seal arrangement. Confirm pressure direction, inter-seal pressure management, and whether each element performs its intended function.
- Validate the corrective action. Test the revised design under representative operating conditions before approving it for production.
Installation Guidelines for Combined Seals
Even a correctly specified combined seal can fail prematurely if it is damaged or incorrectly installed. Installation procedures should be matched to the seal profile and equipment design.
- Clean the assembly: Remove machining debris, metal particles, old seal fragments, and other contaminants from grooves and mating surfaces.
- Inspect all edges: Remove burrs and sharp edges that could cut the sealing lip or deform the polymer jacket during installation.
- Use suitable assembly tools: Avoid sharp metal tools and excessive stretching. Use installation sleeves or fitting cones where required.
- Apply compatible lubrication: Use an assembly lubricant approved for the seal material and working fluid.
- Check orientation: Confirm the pressure side, lip direction, energizer position, and backup-ring location against the manufacturer’s drawing.
- Avoid twisting: Ensure the seal sits evenly in the groove and is not spiraled, rolled, or locally stretched.
- Test before full operation: Follow the equipment manufacturer’s commissioning procedure and check for abnormal leakage, friction, or temperature rise.
Maintenance recommendation: If a seal fails repeatedly in the same position, investigate the groove, shaft or bore, alignment, and operating conditions before changing to a different material. Repeated failure is often evidence of a system-level problem rather than simply a poor-quality seal.
Industries That Use Combined Sealing Solutions
Hydraulic Equipment
Hydraulic cylinders, mobile machinery, presses, injection molding machines, and industrial power units use combined piston and rod sealing systems to manage pressure, reciprocating movement, and leakage. Buffer seals and backup rings can be particularly important in demanding applications.
Automotive and Transportation
Combined sealing technologies are used in selected transmission, steering, suspension, braking, and powertrain assemblies. Material compatibility, temperature cycling, vibration, and long-term dimensional stability are important selection factors.
Industrial Pumps and Valves
Pumps and valves may use multiple sealing elements to control fluid leakage, protect internal components, and accommodate pressure fluctuations. The design must account for the actual movement type and process fluid.
Agricultural and Construction Machinery
Excavators, loaders, tractors, lifting equipment, and other mobile machines operate in environments with dust, mud, water, vibration, and changing loads. A properly designed rod sealing arrangement helps retain hydraulic oil while limiting contamination ingress.
Industrial Automation
Pneumatic actuators, automated production equipment, and precision motion systems may use combined or multi-lip seals where low friction, repeatable movement, and reliable air retention are required.
What Should B2B Buyers Ask a Combined Seal Manufacturer?
For OEM procurement teams, engineering departments, and industrial distributors, evaluating a supplier requires more than comparing unit prices. A reliable manufacturer should be able to explain the design logic, material selection, dimensional tolerances, and validation process behind the proposed sealing solution.
Before requesting a quotation, prepare the following information:
- Seal application: piston, rod, rotary shaft, valve, pump, or static joint.
- Required dimensions, groove drawing, and available installation space.
- Operating pressure, maximum pressure, and pressure direction.
- Working temperature range and possible temperature peaks.
- Movement type, speed, stroke length, and cycle frequency.
- Working fluid, lubricant, and potential cleaning chemicals.
- Mating surface material, hardness, finish, and clearance.
- Required service life, leakage expectations, and maintenance interval.
- Annual demand, prototype quantity, packaging requirements, and quality documentation.
Ask the manufacturer whether it can provide material identification, dimensional inspection records, relevant test reports, and traceability information. For custom seals, request a drawing that clearly identifies the profile, material, tolerances, and installation orientation.
A useful supplier evaluation question: Can the manufacturer explain how each component in the combined seal contributes to pressure control, friction management, contamination exclusion, or extrusion resistance in your specific application?
Frequently Asked Questions About Combined Sealing
FAQ 1: What is the main purpose of a combined seal?
The main purpose is to combine complementary sealing functions in one assembly or arrangement. For example, an elastomer can provide elastic preload while a PTFE jacket offers a low-friction sliding surface. In other designs, a primary seal, secondary seal, backup ring, and wiper work together to control leakage and protect the system.
FAQ 2: What is the difference between a combined seal and a single O-ring?
An O-ring is a single elastomeric sealing element that is commonly used in static and selected dynamic applications. A combined seal integrates multiple materials or sealing elements to perform additional functions, such as reducing friction, resisting extrusion, controlling leakage in stages, or excluding contaminants. The appropriate choice depends on operating conditions and design requirements.
FAQ 3: Why are PTFE and rubber often used together in combined seals?
Rubber provides elastic deformation and helps maintain contact pressure, while PTFE offers low friction and good wear and chemical-resistance characteristics in many applications. Combining them can provide a useful balance of sealing force and sliding performance. The exact compound and profile must still be validated against the working fluid, temperature, pressure, and speed.
FAQ 4: Can combined seals be used in high-pressure hydraulic cylinders?
Yes, some combined seal designs are developed for high-pressure hydraulic applications. However, suitability depends on the seal profile, material strength, extrusion clearance, backup-ring arrangement, groove dimensions, and pressure peaks. A design should be selected using the manufacturer’s application data rather than assuming that every combined seal is suitable for high pressure.
FAQ 5: Why does a combined seal still leak after replacement?
Possible causes include incorrect seal orientation, damaged installation surfaces, unsuitable material, incorrect groove dimensions, excessive clearance, contamination, poor lubrication, pressure trapped between sealing elements, or system misalignment. Inspect the complete assembly and operating conditions before replacing the seal again.
Conclusion: Select the Sealing System Around the Application
The operating principle of combined sealing is based on the coordinated performance of multiple materials or sealing elements. By assigning different functions to the energizer, sealing jacket, backup ring, buffer element, and wiper, engineers can develop a sealing arrangement that addresses more than one operating challenge.
However, reliable performance does not come from adding components without a clear purpose. Pressure direction, inter-seal pressure, fluid compatibility, temperature, speed, groove geometry, surface finish, and installation quality must all be considered together.
For global OEM buyers, engineers, and distributors, the most effective approach is to provide the manufacturer with complete application data and request a technically justified sealing design. This helps reduce trial-and-error selection, avoid repeated leakage problems, and improve the long-term reliability of industrial equipment.
Need a Combined Seal for Your Application?
Choosing the right combined sealing solution starts with understanding your equipment, working fluid, pressure, temperature, and movement conditions. Share your drawings, dimensions, and operating requirements with our technical team to discuss material options, seal profiles, and custom manufacturing possibilities.
Contact us for technical support and a customized sealing solution for your OEM or distribution requirements.
Technical References and Further Reading
- Parker Hannifin – Fluid Power Seal Design Guide: seal profiles, backup rings, and hydraulic and pneumatic sealing design considerations.
- Trelleborg Sealing Solutions – Technical Catalogs and Engineering Resources: hydraulic seals, O-rings, backup rings, and application-specific sealing information.
- Tribology International – Investigation into the Inter-Lip Characteristics of Combined Seals with Double Lips: research into inter-lip pressure, friction, and operating conditions in combined reciprocating seals.
- ScienceDirect – Sealing and Tandem Seal Arrangements: technical discussion of multiple-seal configurations and inter-seal pressure buildup.
- Engineering Library – Hydraulic Sealing Devices and Materials: overview of hydraulic seal types, backup rings, and material functions.
- NASA Technical Reports Server – Dynamic Sealing Principles: technical background on seal geometry, leakage control, lubrication, friction, and wear.







